Issue
I'm trying to detects the numbers found in my sqares, and I thought I could use the libary pytesseract, but for some reason I read the wrong values.
This is the console output:
And here I have all my pictures (they are seperated, this is just to show them all)
import numpy as np
import cv2
import re
from PIL import Image
import pytesseract
pytesseract.pytesseract.tesseract_cmd = r'C:\Program Files\Tesseract-OCR\tesseract'
img = cv2.imread('gulRecNum.jpg')
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
# convert to HSV, since red and yellow are the lowest hue colors and come before green
hsv = cv2.cvtColor(img, cv2.COLOR_BGR2HSV)
# create a binary thresholded image on hue between red and yellow
lower = (0,240,160)
upper = (30,255,255)
thresh = cv2.inRange(hsv, lower, upper)
# apply morphology
kernel = cv2.getStructuringElement(cv2.MORPH_ELLIPSE, (9,9))
clean = cv2.morphologyEx(thresh, cv2.MORPH_OPEN, kernel)
kernel = cv2.getStructuringElement(cv2.MORPH_ELLIPSE, (15,15))
clean = cv2.morphologyEx(thresh, cv2.MORPH_CLOSE, kernel)
# get external contours
contours = cv2.findContours(clean, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)
contours = contours[0] if len(contours) == 2 else contours[1]
result1 = img.copy()
result2 = img.copy()
mask = np.zeros(result2.shape, dtype=np.uint8)
thresh = cv2.threshold(gray, 0, 255, cv2.THRESH_BINARY_INV + cv2.THRESH_OTSU)[1]
ROI_number = 0
for c in contours:
cv2.drawContours(result1,[c],0,(0,0,0),2)
# get rotated rectangle from contour
rot_rect = cv2.minAreaRect(c)
box = cv2.boxPoints(rot_rect)
box = np.int0(box)
# draw rotated rectangle on copy of img
cv2.drawContours(result2,[box],0,(0,0,0),2)
# Gør noget hvis arealet er større end 1.
# Whats the area of the component?
areal = cv2.contourArea(c)
if(areal > 1):
# get the center of mass
M = cv2.moments(c)
cx = int(M['m10']/M['m00'])
cy = int(M['m01']/M['m00'])
center = (cx, cy)
print("\nx: ",cx,"\ny: ",cy)
color = (0, 0, 255)
cv2.circle(result2, center, 3, color, -1)
cv2.putText(result2, "center", (int(cx) - 10, int(cy) - 20),
cv2.FONT_HERSHEY_SIMPLEX, 1.2, color, 2)
# LOOK AT THIS PART
x,y,w,h = cv2.boundingRect(c)
ROI = 255 - thresh[y:y+h, x:x+w]
cv2.drawContours(mask, [c], -1, (255,255,255), -1)
cv2.imwrite('ROI_{}.png'.format(ROI_number), ROI)
Number = pytesseract.image_to_string(ROI, config='--psm 13 --oem 3 -c tessedit_char_whitelist=0123456789')
print("Number ", Number)
ROI_number += 1
# save result
cv2.imwrite("4cubes_result2.png",result2)
# display result
imS = cv2.resize(result2, (600, 400))
cv2.imshow("result2", imS)
cv2.waitKey(0)
cv2.destroyAllWindows()
Thought I could write Number = pytesseract.image_to_string(ROI, config='--psm 13 --oem 3 -c tessedit_char_whitelist=0123456789') print(Number)
and then get the number from the image, but I don't, how can that be?
EDIT NEW ERROR
how do i solve it with this picture?
from PIL import Image
from operator import itemgetter
import numpy as np
import easyocr
import cv2
import re
import imutils
import pytesseract
pytesseract.pytesseract.tesseract_cmd = r'C:\Program Files\Tesseract-OCR\tesseract'
reader = easyocr.Reader(['ch_sim','en']) # need to run only once to load model into memory
#Define empty array
Cubes = []
def getNumber(ROI):
img = cv2.imread(ROI)
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
ret,thresh = cv2.threshold(gray,127,255,0)
#cv2.imshow(thresh)
#cv2.imshow('Thresholded original',thresh)
#cv2.waitKey(0)
## Get contours
contours,h = cv2.findContours(thresh,cv2.RETR_CCOMP, cv2.CHAIN_APPROX_SIMPLE)
## only draw contour that have big areas
imx = img.shape[0]
imy = img.shape[1]
lp_area = (imx * imy) / 10
tmp_img = img.copy()
for cnt in contours:
approx = cv2.approxPolyDP(cnt,0.01 * cv2.arcLength(cnt, True), True)
if cv2.contourArea(cnt) > lp_area:
# Draw box corners and minimum area rectangle
rect = cv2.minAreaRect(cnt)
box = cv2.boxPoints(rect)
box = np.int0(box)
#cv2.drawContours(tmp_img, [box], 0, (0, 50, 255), 3)
#cv2.circle(tmp_img, tuple(box[0]), 8, (0, 255, 0), -1)
#cv2.circle(tmp_img, tuple(box[1]), 8, (0, 255, 0), -1)
#cv2.circle(tmp_img, tuple(box[2]), 8, (0, 255, 0), -1)
#cv2.circle(tmp_img, tuple(box[3]), 8, (0, 255, 0), -1)
#cv2.imshow(tmp_img)
#cv2.imshow('Minimum Area Rectangle', tmp_img)
#cv2.waitKey(0)
## Correct orientation and crop
# Link, https://jdhao.github.io/2019/02/23/crop_rotated_rectangle_opencv/
width = int(rect[1][0])
height = int(rect[1][1])
src_pts = box.astype("float32")
dst_pts = np.array([[0, height-1],
[0, 0],
[width-1, 0],
[width-1, height-1]], dtype="float32")
M = cv2.getPerspectiveTransform(src_pts, dst_pts)
warped = cv2.warpPerspective(img, M, (width, height))
# Run OCR on cropped image
# If the predicted value is digit print else rotate first
result = reader.readtext(warped)
print(result)
predicted_digit = result[0][1]
if np.char.isdigit(predicted_digit) == True:
cv2.imshow("warped " + ROI,warped)
else:
rot_img = warped.copy()
for i in range(0, 3):
rotated_image = cv2.rotate(rot_img, cv2.cv2.ROTATE_90_CLOCKWISE)
result = reader.readtext(rotated_image)
#if np.array(result).size == 0:
# continue
if not result:
rot_img = rotated_image
continue
#if len(result) == 0:
# continue
predicted_digit = result[0][1]
#print(result)
#print(predicted_digit)
#cv2.imshow(rotated_image)
if np.char.isdigit(predicted_digit) == True:
cv2.imshow("Image " + ROI, rotated_image)
break
rot_img = rotated_image
return predicted_digit
def sortNumbers(Cubes):
Cubes = sorted(Cubes, key=lambda x: int(x[2]))
#Cubes.sort(key=itemgetter(2)) # In-place sorting
#Cubes = sorted(Cubes, key=itemgetter(2)) # Create a new list
return Cubes
#img = cv2.imread('gulRecNum.jpg')
img = cv2.imread('webcam7.png')
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
# convert to HSV, since red and yellow are the lowest hue colors and come before green
hsv = cv2.cvtColor(img, cv2.COLOR_BGR2HSV)
# create a binary thresholded image on hue between red and yellow
#Change these if cube colours changes?
lower =(20, 100, 100)
upper = (30, 255, 255)
#lower = (0,240,160)
#upper = (30,255,255)
thresh = cv2.inRange(hsv, lower, upper)
# apply morphology
kernel = cv2.getStructuringElement(cv2.MORPH_ELLIPSE, (9,9))
clean = cv2.morphologyEx(thresh, cv2.MORPH_OPEN, kernel)
kernel = cv2.getStructuringElement(cv2.MORPH_ELLIPSE, (15,15))
clean = cv2.morphologyEx(thresh, cv2.MORPH_CLOSE, kernel)
# get external contours
contours = cv2.findContours(clean, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)
contours = contours[0] if len(contours) == 2 else contours[1]
result2 = img.copy()
mask = np.zeros(result2.shape, dtype=np.uint8)
thresh = cv2.threshold(gray, 0, 255, cv2.THRESH_BINARY_INV + cv2.THRESH_OTSU)[1]
ROI_number = 0
for c in contours:
cv2.drawContours(result2,[c],0,(0,0,0),2)
# get rotated rectangle from contour
rot_rect = cv2.minAreaRect(c)
box = cv2.boxPoints(rot_rect)
box = np.int0(box)
# draw rotated rectangle on copy of img
cv2.drawContours(result2,[box],0,(0,0,0),2)
# Gør noget hvis arealet er større end 1.
# Whats the area of the component?
areal = cv2.contourArea(c)
if(areal > 1):
# get the center of mass
M = cv2.moments(c)
cx = int(M['m10']/M['m00'])
cy = int(M['m01']/M['m00'])
center = (cx, cy)
print("\nx: ",cx,"\ny: ",cy)
color = (0, 0, 255)
cv2.circle(result2, center, 3, color, -1)
cv2.putText(result2, "center", (int(cx) - 10, int(cy) - 20),
cv2.FONT_HERSHEY_SIMPLEX, 1.2, color, 2)
x,y,w,h = cv2.boundingRect(c)
ROI = 255 - thresh[y:y+h, x:x+w]
cv2.drawContours(mask, [c], -1, (255,255,255), -1)
cv2.imwrite('ROI_{}.png'.format(ROI_number), ROI)
#Read saved image (number)
result = getNumber('ROI_{}.png'.format(ROI_number))
print("ROI_number: ", result)
Cubes.append([cx, cy, result])
ROI_number += 1
# save result
cv2.imwrite("4cubes_result2.png",result2)
# display result
imS = cv2.resize(result2, (600, 400))
cv2.imshow("result2", imS)
#cv2.imshow('mask', mask)
#cv2.imshow('thresh', thresh)
SortedCubes = sortNumbers(Cubes)
print("\nFound array [x, y, Cube_num] = ", Cubes)
print("Sorted array [x, y, Cube_num] = ", SortedCubes)
cv2.waitKey(0)
cv2.destroyAllWindows()
I get the following error (it can't detect a number)
Traceback (most recent call last): File "c:/Users/Mads/OneDrive/Universitet/7. semester/ROB1/python/objectDetectiong.py", line 169, in <module> result = getNumber('ROI_{}.png'.format(ROI_number)) File "c:/Users/Mads/OneDrive/Universitet/7. semester/ROB1/python/objectDetectiong.py", line 70, in getNumber predicted_digit = result[0][1] IndexError: list index out of range
Solution
This is implementation of my comment. Since, I do not have individual images this code will work with given grid like processed image.
For OCR I used EasyOCR instead of Tesserect. You could also try pytesserect on each output cropped images. Instead of rotating 4 times by 90 degrees by confidence, I went with digit detection on OCR result. If a detection is not a number then only rotate and retry.
Tested on google colab. Replace cv2_imshow(...) with cv2.imshow(...) for working locally. Also remove from google.colab.patches import cv2_imshow import.
This is modified version of my answer on card orientation correction here, OpenCV: using Canny and Shi-Tomasi to detect round corners of a playing card. All previous code is left as comment.
Code
!pip install easyocr
import easyocr
reader = easyocr.Reader(['ch_sim','en']) # need to run only once to load model into memory
"""
Based on my answer of rotated card detection,
https://stackoverflow.com/questions/64860785/opencv-using-canny-and-shi-tomasi-to-detect-round-corners-of-a-playing-card/64862448#64862448
"""
import cv2
import numpy as np
from google.colab.patches import cv2_imshow
img = cv2.imread('1.jpg')
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
ret,thresh = cv2.threshold(gray,127,255,0)
#cv2_imshow(thresh)
#cv2.imshow('Thresholded original',thresh)
#cv2.waitKey(0)
## Get contours
contours,h = cv2.findContours(thresh,cv2.RETR_CCOMP, cv2.CHAIN_APPROX_SIMPLE)
## only draw contour that have big areas
imx = img.shape[0]
imy = img.shape[1]
lp_area = (imx * imy) / 10
#################################################################
# Four point perspective transform
# https://www.pyimagesearch.com/2014/08/25/4-point-opencv-getperspective-transform-example/
#################################################################
def order_points(pts):
# initialzie a list of coordinates that will be ordered
# such that the first entry in the list is the top-left,
# the second entry is the top-right, the third is the
# bottom-right, and the fourth is the bottom-left
rect = np.zeros((4, 2), dtype = "float32")
# the top-left point will have the smallest sum, whereas
# the bottom-right point will have the largest sum
s = pts.sum(axis = 1)
rect[0] = pts[np.argmin(s)]
rect[2] = pts[np.argmax(s)]
# now, compute the difference between the points, the
# top-right point will have the smallest difference,
# whereas the bottom-left will have the largest difference
diff = np.diff(pts, axis = 1)
rect[1] = pts[np.argmin(diff)]
rect[3] = pts[np.argmax(diff)]
# return the ordered coordinates
return rect
def four_point_transform(image, pts):
# obtain a consistent order of the points and unpack them
# individually
rect = order_points(pts)
(tl, tr, br, bl) = rect
# compute the width of the new image, which will be the
# maximum distance between bottom-right and bottom-left
# x-coordiates or the top-right and top-left x-coordinates
widthA = np.sqrt(((br[0] - bl[0]) ** 2) + ((br[1] - bl[1]) ** 2))
widthB = np.sqrt(((tr[0] - tl[0]) ** 2) + ((tr[1] - tl[1]) ** 2))
maxWidth = max(int(widthA), int(widthB))
# compute the height of the new image, which will be the
# maximum distance between the top-right and bottom-right
# y-coordinates or the top-left and bottom-left y-coordinates
heightA = np.sqrt(((tr[0] - br[0]) ** 2) + ((tr[1] - br[1]) ** 2))
heightB = np.sqrt(((tl[0] - bl[0]) ** 2) + ((tl[1] - bl[1]) ** 2))
maxHeight = max(int(heightA), int(heightB))
# now that we have the dimensions of the new image, construct
# the set of destination points to obtain a "birds eye view",
# (i.e. top-down view) of the image, again specifying points
# in the top-left, top-right, bottom-right, and bottom-left
# order
dst = np.array([
[0, 0],
[maxWidth - 1, 0],
[maxWidth - 1, maxHeight - 1],
[0, maxHeight - 1]], dtype = "float32")
# compute the perspective transform matrix and then apply it
M = cv2.getPerspectiveTransform(rect, dst)
warped = cv2.warpPerspective(image, M, (maxWidth, maxHeight))
# return the warped image
return warped
#################################################################
#print(len(contours))
tmp_img = img.copy()
for cnt in contours:
approx = cv2.approxPolyDP(cnt,0.01 * cv2.arcLength(cnt, True), True)
## calculate number of vertices
#print(len(approx))
## Get the largest contours only
## Side count cannot be used since contours are not all rectangular
if cv2.contourArea(cnt) > lp_area:
#if len(approx) == 4 and cv2.contourArea(cnt) > lp_area:
# print("\n\n")
# print("#################################################")
# print("rectangle")
# print("#################################################")
# print("\n\n")
#tmp_img = img.copy()
#cv2.drawContours(tmp_img, [cnt], 0, (0, 255, 0), 6)
#cv2_imshow(tmp_img)
#cv2.imshow('Contour Borders', tmp_img)
#cv2.waitKey(0)
# tmp_img = img.copy()
# cv2.drawContours(tmp_img, [cnt], 0, (255, 0, 255), -1)
# cv2_imshow(tmp_img)
# #cv2.imshow('Contour Filled', tmp_img)
# #cv2.waitKey(0)
# # Make a hull arround the contour and draw it on the original image
# tmp_img = img.copy()
# mask = np.zeros((img.shape[:2]), np.uint8)
# hull = cv2.convexHull(cnt)
# cv2.drawContours(mask, [hull], 0, (255, 255, 255), -1)
# cv2_imshow(mask)
# #cv2.imshow('Convex Hull Mask', mask)
# #cv2.waitKey(0)
# # Draw minimum area rectangle
# #tmp_img = img.copy()
# rect = cv2.minAreaRect(cnt)
# box = cv2.boxPoints(rect)
# box = np.int0(box)
# cv2.drawContours(tmp_img, [box], 0, (255, 0, 0), 2)
# #cv2_imshow(tmp_img)
# #cv2.imshow('Minimum Area Rectangle', tmp_img)
# #cv2.waitKey(0)
# Draw box corners and minimum area rectangle
#tmp_img = img.copy()
rect = cv2.minAreaRect(cnt)
box = cv2.boxPoints(rect)
box = np.int0(box)
#print(rect)
#print(box)
cv2.drawContours(tmp_img, [box], 0, (0, 50, 255), 3)
cv2.circle(tmp_img, tuple(box[0]), 8, (0, 255, 0), -1)
cv2.circle(tmp_img, tuple(box[1]), 8, (0, 255, 0), -1)
cv2.circle(tmp_img, tuple(box[2]), 8, (0, 255, 0), -1)
cv2.circle(tmp_img, tuple(box[3]), 8, (0, 255, 0), -1)
#cv2_imshow(tmp_img)
#cv2.imshow('Minimum Area Rectangle', tmp_img)
#cv2.waitKey(0)
## Correct orientation and crop
# Link, https://jdhao.github.io/2019/02/23/crop_rotated_rectangle_opencv/
width = int(rect[1][0])
height = int(rect[1][1])
src_pts = box.astype("float32")
dst_pts = np.array([[0, height-1],
[0, 0],
[width-1, 0],
[width-1, height-1]], dtype="float32")
M = cv2.getPerspectiveTransform(src_pts, dst_pts)
warped = cv2.warpPerspective(img, M, (width, height))
#cv2_imshow(warped)
# Run OCR on cropped image
# If the predicted value is digit print else rotate first
result = reader.readtext(warped)
predicted_digit = result[0][1]
print("Detected Text:")
if np.char.isdigit(predicted_digit) == True:
print(result)
print(predicted_digit)
cv2_imshow(warped)
else:
rot_img = warped.copy()
for i in range(0, 3):
rotated_image = cv2.rotate(rot_img, cv2.cv2.ROTATE_90_CLOCKWISE)
result = reader.readtext(rotated_image)
#if np.array(result).size == 0:
# continue
if not result:
rot_img = rotated_image
continue
#if len(result) == 0:
# continue
predicted_digit = result[0][1]
#print(result)
#print(predicted_digit)
#cv2_imshow(rotated_image)
if np.char.isdigit(predicted_digit) == True:
print(result)
print(predicted_digit)
cv2_imshow(rotated_image)
break
rot_img = rotated_image
# # Draw bounding rectangle
# #tmp_img = img.copy()
# x, y, w, h = cv2.boundingRect(cnt)
# cv2.rectangle(tmp_img, (x, y), (x + w, y + h), (255, 0, 0), 2)
# #cv2_imshow(tmp_img)
# #cv2.imshow('Bounding Rectangle', tmp_img)
# #cv2.waitKey(0)
# # Bounding Rectangle and Minimum Area Rectangle
# #tmp_img = img.copy()
# rect = cv2.minAreaRect(cnt)
# box = cv2.boxPoints(rect)
# box = np.int0(box)
# cv2.drawContours(tmp_img, [box], 0, (0, 0, 255), 2)
# x, y, w, h = cv2.boundingRect(cnt)
# cv2.rectangle(tmp_img, (x, y), (x + w, y + h), (0, 255, 0), 2)
# #cv2_imshow(tmp_img)
# #cv2.imshow('Bounding Rectangle', tmp_img)
# #cv2.waitKey(0)
# # determine the most extreme points along the contour
# # https://www.pyimagesearch.com/2016/04/11/finding-extreme-points-in-contours-with-opencv/
# tmp_img = img.copy()
# extLeft = tuple(cnt[cnt[:, :, 0].argmin()][0])
# extRight = tuple(cnt[cnt[:, :, 0].argmax()][0])
# extTop = tuple(cnt[cnt[:, :, 1].argmin()][0])
# extBot = tuple(cnt[cnt[:, :, 1].argmax()][0])
# cv2.drawContours(tmp_img, [cnt], -1, (0, 255, 255), 2)
# cv2.circle(tmp_img, extLeft, 8, (0, 0, 255), -1)
# cv2.circle(tmp_img, extRight, 8, (0, 255, 0), -1)
# cv2.circle(tmp_img, extTop, 8, (255, 0, 0), -1)
# cv2.circle(tmp_img, extBot, 8, (255, 255, 0), -1)
# print("Corner Points: ", extLeft, extRight, extTop, extBot)
# cv2_imshow(tmp_img)
# #cv2.imshow('img contour drawn', tmp_img)
# #cv2.waitKey(0)
# #cv2.destroyAllWindows()
# ## Perspective Transform
# tmp_img = img.copy()
# pts = np.array([extLeft, extRight, extTop, extBot])
# warped = four_point_transform(tmp_img, pts)
# cv2_imshow(tmp_img)
# #cv2.imshow("Warped", warped)
# #cv2.waitKey(0)
cv2_imshow(tmp_img)
#cv2.destroyAllWindows()
Output Prediction
Detected Text:
[([[85, 67], [131, 67], [131, 127], [85, 127]], '1', 0.9992043972015381)]
1
Detected Text:
[([[85, 65], [133, 65], [133, 125], [85, 125]], '2', 0.9991914629936218)]
2
Detected Text:
[([[96, 72], [144, 72], [144, 128], [96, 128]], '4', 0.9996564984321594)]
4
Detected Text:
[([[88, 76], [132, 76], [132, 132], [88, 132]], '3', 0.9973381161689758)]
3
White Region Detection With Corners
Alternate methods,
- Try pretrained digit classification model trained from MNIST and others on each large contours exceeding certain area.
- Use multitask object detection with rotation. One output of network will be detections another angle regression to predict orientation.
- Use text detector like,
Eastand run OCR on each detected text.
Answered By - B200011011
0 comments:
Post a Comment
Note: Only a member of this blog may post a comment.